• 3A3437E, ToughTek® S340e Portable Stucco Pump, Operation, Repiar and Parts
• ToughTek Stucco and EIFS Materials Spec Sheet
• 3A3439D - ToughTek S340e Pump Lower Conversion Kit (English) noptc
• 3A3438D, Pole Spray Applicator Operation, Parts, English
• 3A3653C - HTX Finish Coat Applicator, Instructions - Parts, (English)
• 349788EN, Repair Mortar Industry
• 349883EN, ToughTek Product Line Brochure

Whether it's stucco or EIFS materials, the ToughTek S340e Stucco Pump easily handles base and finish coats, and air / water-resistive barrier materials as well. With the ToughTek S340e, you’ll save time, speed up the process and increase your profits by using a ToughTek Stucco Pump to spray and finish-trowel the material instead of using the traditional hawk and trowel method.

Variable speed control – dial in the exact speed needed. 

The ToughTek S340e is specifically designed for pumping aggregated materials such as Stucco and core filling. Easily change between F340e and S340e with a simple conversion kit.

One pump – many materials

For EIFS applications, the portable ToughTek S340e handles EIFS base coats and finish coats. For stucco applications, the S340e easily pumps stucco scratch coats, brown coats and finish coats

A superior alternative to hand troweling

Engineered with piston pump technology, the ToughTek S340e Stucco Pump easily handles heavy, abrasive materials. Because it can deliver materials through long hose lengths, you can spray farther distances and get the job done sooner.

25A300: S340e bare, 120V, 15A, 1-ph

25A302: S340e bare, 120V, 15A, 1-ph with remote on/off switch

25A218 Stucco Kit: includes 1.5 in x 25 ft (7.6 m) hose, 1.25 in x 25 ft (7.6 m) hose and Stucco Pole Applicator (for use with stucco base coats, scratch coats and brown coats)

25A219 EIFS and Fine Finish Kit: includes 1.25 in x 25 ft (7.6 m) hose, 1 in x 10 ft (3 m) hose and HTX Applicator (for use with EIFS base coats, finish coats and fluid-applied air/water-resistive barriers)

• 3A4361J, ToughTek P-Series Pumps Operation, Repair, Parts, English
• 349789EN, Self Leveling Underlayment Industry Brochure
• 349788EN, Repair Mortar Industry
• 349883EN, ToughTek Product Line Brochure

Portable rotor stator pump for mortars and cementitious materialsBuilt for mid-range mortar applications

Small and compact, yet large enough to get the job done

No matter what type of mortar you’re pumping, the ToughTek P20 Mortar Pump provides long-lasting durability and rugged performance – and handles a wide range of mortar materials. Its compact design and light weight make it easy to transport and use on the jobsite. Reduce manual labor and start pumping with the P20 Mortar Pump instead.

Say goodbye to buckets. Let the P20 do the work!

• Easy to use, easy to move

• Variable pump output lets you adjust material flow

• Optional remote control operation

• Flow rate: 10 gpm (38 lpm)

• Output (underlayment): 200 bags per hour (based on 50-lb/22.6 kg bags)

• Pumping distance: 100 feet + (30 m)

• Pumping height: 60 feet (18 m)

• Reversible pump direction

• Hopper capacity: 16 gal / 2.2 cubic ft

• Power requirements: 230V, 30A, 1-ph

• Easy to take apart for quick clean-up and transport

• Easy to maintain with long-wearing parts and components

•  3A4350H - ToughTek CM-Series Continuous Mixers, Operation, (English)

Automatic mixers for cementitious materials Automatic mixing with consistent continuous output

Boost productivity with automatic mixing

With the ToughTek CM40 Continuous Mixer, it’s easy to improve your crew’s production rates by automatically mixing pre-blended mortar products. The CM40 eliminates the need to manually measure water into the mix. Simply set the water flow rate for your specific material, break bags of material into the hopper, and the system automatically does the rest. You increase productivity, get done sooner and boost your bottom line.

Primary features:

• Easy to operate, easy to move

• Variable pump output lets you adjust material flow

• Flow rate: 18 gpm (70 lpm)

• Output (underlayment): 300 bags per hour / up to 150 cubic feet (based on 50-lb/22.6 kg bags)

• Hopper capacity: 16 gal / 2.2 cubic ft

• Power requirements: 230V, 30A, 1-ph or 230V, 30A, 3-ph

• Easy to take apart for quick clean-up and transport

• Easy to maintain with long-wearing parts and components