• 3A4361J, ToughTek P-Series Pumps Operation, Repair, Parts, English
• 349789EN, Self Leveling Underlayment Industry Brochure
• 349788EN, Repair Mortar Industry
• 349883EN, ToughTek Product Line Brochure

Portable rotor stator pump for mortar and cementitious materialsBuilt for mid-range applications

Small and compact, yet large enough to get the job done

No matter what type of mortar you’re pumping, the ToughTek P30 Mortar Pump provides long-lasting durability and rugged performance – and handles a wide range of mortar materials. Its compact design and light weight make it easy to transport and use on the jobsite. Reduce manual labor and start pumping with the P30 Mortar Pump instead. Two models: P30 and P30ht High Torque (for epoxy applications).

Say Goodbye to buckets. Let the P30 do the Work!

• Easy to use, easy to move

• Variable pump output lets you adjust material flow

• Optimal remote control operation

• Flow rate: 10 gpm (38 lpm)

• Output (underlayment): 200 bags per hour (based on 50-lb/22.6 kg bags)

• Pumping distance: 100 feet + (30 m)

• Pumping height: 60 feet (18 m)

• Reversible pump direction

• Hopper capacity: 16 gal / 2.2 cubic ft

• Power requirements: 230V, 30A, 1-ph

• Easy to take apart for quick clean-up and transport

• Easy to maintain with long-wearing parts and components

• 349563EN-D, ToughTek Mixing Pumps for Self-leveling Flooring
• 3A4349K, ToughTek MP-Series Pumps Operation (English)
• 349565EN-C, ToughTek Rotor/Stator Pumps
• 349789EN, Self Leveling Underlayment Industry Brochure
• 349883EN, ToughTek Product Line Brochure

Rotor stator pump for mixing, pumping and applying pre-blended mortarsIdeal for self-leveling underlayment, non-shrink grout and pre-blended toppings

Self-leveling made easy

Mix, pump and apply pre-blended cementitious construction materials with a single, easy-to-use machine. With the ToughTek MP20 and MP40 Mixing Pump, water is automatically added to the mixing chamber. All you do is set the water flow rate, add material to the hopper and you’re ready to begin. Ideal for concrete repair or restoration and flooring applications.

Set water flow rate according to manufacturer’s directions
Break bags into hopper
Material and water are mixed within the mixing chamber
Once you set the water flow rate, you can run it all day long
Steady water input results in consistent material and flow - batch after batch, day after day
Two models: MP20 and MP40 (for high output applications)

Materials

Handles most pre-blended cementitious construction materials such as:

• Self-leveling underlayments

• Pre-blended topping materials

• Pre-blended non-shrink grouts

Typical Applications

• Correct uneven floors

• Repair damaged concrete

• Provide a smooth surface for carpet, tile or other floor covering

• Structural grouting of steel columns

• Anchoring applications

Designed with contractors in mind

• Compact, easy to maneuver

• Easy to operate with variable speed control

• 425 psi (29 bar) pumping pressure

• Vertical pumping distance: 60 feet (18 m)

• Horizontal pumping distance: 200 feet (61 m)

• Rugged hopper with bag breaker – holds six 50-lb (23 kg) bags

• Power MP20: 230V, 30A, 1-ph

• Power MP40: 230V, 30A, 3-ph

• Output MP20: up to 25 lpm (50 cu ft/hr)

• Output MP40: up to 50 lpm (100 cu ft/hr)

Fast Clean-Up and easy maintenance

• Built-in cleanout sprayer and on-board water line makes it easy to clean out hopper

• Drain port can be removed for thorough cleaning and rinsing

• Mixing shaft can be quickly removed