Let the Mixer Do the Work

As the stucco, EIFS and mortar markets move towards pre-blended products, it’s time to consider a machine designed specifically for these materials. Remove the manual process of measuring and mixing by hand or batch mixer and switch to Graco’s ToughTek CM20 continuous mixer. To run this machine, simply break pre-blended material into the hopper, turn the system on, and adjust water flow rate to achieve a desired mix. Once the water flow is set, the CM20 will remain constant throughout the day producing a consistent material mix.

High Production, High Quality Results

For large jobs, the affordable CM20 continuous mixer achieves higher output than traditional methods and comparable mixers while maintaining a high quality mix. In addition, the CM20 is the first continuous mixer on the market to be rated for a standard 120V circuit so you can plug it in and start mixing anywhere on the site.

It’s time to switch to a continuous mixer that
will keep your operation continuously running.

Benefits

• Plug and play – Rated for a 120V circuit

• Simple operation and controls – Only need to set water flow once

• Lightweight and portable – Weighs 210 pounds and is easy to move
around a jobsite

• Easy disassembly for cleaning and transport

Technical Specifications

• Output – Up to 40 bags of pre-blended stucco per hour

• Hopper holds up to 3 (80lb) bags of pre-blended stucco

• Max aggregate size – 5/16 in. (8 mm)