Tax Deduction Info on https://d3ciwvs59ifrt8.cloudfront.net/0090351f-f0f5-4259-a9d2-22a15e162dbe/87c8228d-5d22-44a0-b92f-a69a7f495581_m.png

products

  • CLEAR ALL

SORT BY

  • LOW - HIGH
  • HIGH - LOW
  • A - Z
  • Z - A
ToughTek MP40 Bare, Graco Mixing Pump 25M062

$0.00

image

                          

CALL(630) 766-3498 FOR YOUR PERSONAL QUOTE TODAY!

 SEVERAL VERSIONS AND PACKAGES  AVAILABLE.

Links for Graco ToughTek MP40

Rotor stator pump for mixing, pumping and applying pre-blended mortarsIdeal for self-leveling underlayment, non-shrink grout and pre-blended toppings

Self-leveling made easy

Mix, pump and apply pre-blended cementitious construction materials with a single, easy-to-use machine. With the ToughTek MP20 and MP40 Mixing Pump, water is automatically added to the mixing chamber. All you do is set the water flow rate, add material to the hopper and you’re ready to begin. Ideal for concrete repair or restoration and flooring applications.

Set water flow rate according to manufacturer’s directions
Break bags into hopper
Material and water are mixed within the mixing chamber
Once you set the water flow rate, you can run it all day long
Steady water input results in consistent material and flow - batch after batch, day after day
Two models: MP20 and MP40 (for high output applications)

Materials

Handles most pre-blended cementitious construction materials such as:

  • Self-leveling underlayments

  • Pre-blended topping materials

  • Pre-blended non-shrink grouts

Typical Applications

  • Correct uneven floors

  • Repair damaged concrete

  • Provide a smooth surface for carpet, tile or other floor covering

  • Structural grouting of steel columns

  • Anchoring applications

Designed with contractors in mind

  • Compact, easy to maneuver

  • Easy to operate with variable speed control

  • 425 psi (29 bar) pumping pressure

  • Vertical pumping distance: 60 feet (18 m)

  • Horizontal pumping distance: 200 feet (61 m)

  • Rugged hopper with bag breaker – holds six 50-lb (23 kg) bags

  • Power MP20: 230V, 30A, 1-ph

  • Power MP40: 230V, 30A, 3-ph

  • Output MP20: up to 25 lpm (50 cu ft/hr)

  • Output MP40: up to 50 lpm (100 cu ft/hr)

Fast Clean-Up and easy maintenance

  • Built-in cleanout sprayer and on-board water line makes it easy to clean out hopper

  • Drain port can be removed for thorough cleaning and rinsing

  • Mixing shaft can be quickly removed

hidden field
ToughTek S340e Bare, Graco Portable Stucco and EIFS Pump 25A300 Also Available with Remote Switch

$0.00

image

                       

CALL (630) 766-3498 FOR YOUR PERSONAL QUOTE TODAY!

 SEVERAL VERSIONS AND PACKAGES  AVAILABLE.

Availible with remote on/off switch

Links For Graco ToughTek S340e

Whether it's stucco or EIFS materials, the ToughTek S340e Stucco Pump easily handles base and finish coats, and air / water-resistive barrier materials as well. With the ToughTek S340e, you’ll save time, speed up the process and increase your profits by using a ToughTek Stucco Pump to spray and finish-trowel the material instead of using the traditional hawk and trowel method.

Variable speed control – dial in the exact speed needed. 

The ToughTek S340e is specifically designed for pumping aggregated materials such as Stucco and core filling. Easily change between F340e and S340e with a simple conversion kit.

One pump – many materials

For EIFS applications, the portable ToughTek S340e handles EIFS base coats and finish coats. For stucco applications, the S340e easily pumps stucco scratch coats, brown coats and finish coats

A superior alternative to hand troweling

Engineered with piston pump technology, the ToughTek S340e Stucco Pump easily handles heavy, abrasive materials. Because it can deliver materials through long hose lengths, you can spray farther distances and get the job done sooner.

25A300: S340e bare, 120V, 15A, 1-ph

25A302: S340e bare, 120V, 15A, 1-ph with remote on/off switch

25A218 Stucco Kit: includes 1.5 in x 25 ft (7.6 m) hose, 1.25 in x 25 ft (7.6 m) hose and Stucco Pole Applicator (for use with stucco base coats, scratch coats and brown coats)

25A219 EIFS and Fine Finish Kit: includes 1.25 in x 25 ft (7.6 m) hose, 1 in x 10 ft (3 m) hose and HTX Applicator (for use with EIFS base coats, finish coats and fluid-applied air/water-resistive barriers)

hidden field
Toughtek F340e Bare, Graco Portable Fireproofing Pump 25A500 Also Available with Remote Switch

$0.00

image

                          

CALL (630) 766-3498 FOR YOUR PERSONAL QUOTE TODAY!

 SEVERAL VERSIONS AND PACKAGES  AVAILABLE.

Available With Air Compressor

Links for Graco ToughTek F340e


Engineered with piston pump technology, ToughTek Fireproofing Pumps deliver high pressures to move fireproofing materials through long hose lengths. Graco's piston pump technology easily handles low, medium and high-density sprayed fire resistive materials (SFRMs), delivering them with a smooth, steady flow rate.

The ToughTek 340e plugs into a standard wall outlet and is compact, portable and easy to move around the job site. This isn't your typical patch pump -- it's much more. Grab the power of ToughTek and get your fireproofing projects done faster and more efficiently.

•  Piston pump technology easily handles fireproofing materials

•  Gets projects done faster with high-pressure performance

•  Electric operation – plugs into a standard 120V, 15A wall outlet

•  Long lasting wear parts for more uptime, less downtime

•  Easy to use, simple to maintain

•  Ideal for fireproofing over structural steel or spray foam insulation

•  Features ProGuard System

•  Built-in protection system continually monitors operation

•  Dual LED indicators provide instant feedback while applying material

•  Automatically shuts pump off to protect from thermal overload or excessive pressure

hidden field
Toughtek F680e Bare, No Compressor, Graco Portable Fireproofing Pump, 24Y502

$0.00

image

                           

CALL (630) 766-3498 FOR YOUR PERSONAL QUOTE TODAY!

 SEVERAL VERSIONS AND PACKAGES  AVAILABLE.

All F680e Units Come With Remote On/Off Switch And Material Hopper

Available With Air Compressor

Links for Graco ToughTek F680e

  • Fireproofing Pump for SFRMsElectric fireproofing pump

  • Grab the power of ToughTek and get done sooner

  • Piston pump technology easily handles gypsum-based and cementitious SFRMs

  • Gets projects done faster with high-pressure performance

  • Electric operation – 230V single phase power, 30 amps

  • Long lasting wear parts for more uptime, less downtime

  • Easy to use, simple to maintain

  • Ideal for fireproofing over structural steel or spray foam insulation

  • Pivoting pump lower for easy maintenance

  • Big performance from a small sprayer

Engineered with piston pump technology, ToughTek Fireproofing Pumps deliver high pressures to move fireproofing materials through long hose lengths. Graco's piston pump technology easily handles low, medium and high-density sprayed fire resistive materials (SFRMs), delivering them with a smooth, steady flow rate.

The ToughTek F680e has a small footprint and is easy to maneuver. With 300 feet of hose, you'll spend more time spraying and less time moving your equipment around the job site. Grab the power of ToughTek and get your fireproofing projects done faster and more efficiently.

hidden field
ToughTek P20 Bare, Graco Mortar Pump 25M030

$0.00

image

                          

CALL (630) 766-3498 FOR YOUR PERSONAL QUOTE TODAY!

 SEVERAL VERSIONS AND PACKAGES  AVAILABLE.

Links for Graco ToughTek P20

Portable rotor stator pump for mortars and cementitious materialsBuilt for mid-range mortar applications

Small and compact, yet large enough to get the job done

No matter what type of mortar you’re pumping, the ToughTek P20 Mortar Pump provides long-lasting durability and rugged performance – and handles a wide range of mortar materials. Its compact design and light weight make it easy to transport and use on the jobsite. Reduce manual labor and start pumping with the P20 Mortar Pump instead.

Say goodbye to buckets. Let the P20 do the work!

  • Easy to use, easy to move

  • Variable pump output lets you adjust material flow

  • Optional remote control operation

  • Flow rate: 10 gpm (38 lpm)

  • Output (underlayment): 200 bags per hour (based on 50-lb/22.6 kg bags)

  • Pumping distance: 100 feet + (30 m)

  • Pumping height: 60 feet (18 m)

  • Reversible pump direction

  • Hopper capacity: 16 gal / 2.2 cubic ft

  • Power requirements: 230V, 30A, 1-ph

  • Easy to take apart for quick clean-up and transport

  • Easy to maintain with long-wearing parts and components

hidden field
ToughTek P30 Bare, Graco Mortar Pump 25M031

$0.00

image

                       

CALL (630) 766-3498 FOR YOUR PERSONAL QUOTE TODAY!

 SEVERAL VERSIONS AND PACKAGES  AVAILABLE.

Links for Graco ToughTek P30 and P30HT

Portable rotor stator pump for mortar and cementitious materialsBuilt for mid-range applications

Small and compact, yet large enough to get the job done

No matter what type of mortar you’re pumping, the ToughTek P30 Mortar Pump provides long-lasting durability and rugged performance – and handles a wide range of mortar materials. Its compact design and light weight make it easy to transport and use on the jobsite. Reduce manual labor and start pumping with the P30 Mortar Pump instead. Two models: P30 and P30ht High Torque (for epoxy applications).

Say Goodbye to buckets. Let the P30 do the Work!

  • Easy to use, easy to move

  • Variable pump output lets you adjust material flow

  • Optimal remote control operation

  • Flow rate: 10 gpm (38 lpm)

  • Output (underlayment): 200 bags per hour (based on 50-lb/22.6 kg bags)

  • Pumping distance: 100 feet + (30 m)

  • Pumping height: 60 feet (18 m)

  • Reversible pump direction

  • Hopper capacity: 16 gal / 2.2 cubic ft

  • Power requirements: 230V, 30A, 1-ph

  • Easy to take apart for quick clean-up and transport

  • Easy to maintain with long-wearing parts and components

hidden field
ToughTek P30X Bare, Graco Mortar Pump 25M040

$0.00

image

                         

CALL (630) 766-3498 FOR YOUR PERSONAL QUOTE TODAY!

 SEVERAL VERSIONS AND PACKAGES  AVAILABLE.

 

Links for Graco ToughTek P30X

Portable rotor stator pump for mortars and cementitious materials. For medium to large projects

Rugged design with a large Hopper for maximum versatility

The ToughTek P30X Mortar Pump is perfect for contractors who are looking for versatility and features for medium to large mortar projects. The P30X has a large 60-gallon (227 liter) hopper and offers superior performance for a variety of mortar materials. Two models: P30x and P30Xht (for epoxy applications). 

Ideal for batch mixes and higher volume projects:

  • Easy to operate, easy to move

  • Variable pump output lets you adjust material flow

  • Optional remote control operation

  • Flow rate: 10 gpm (38 lpm)

  • Output (underlayment): 200 bags per hour (based on 50-lb/22.6 kg bags)

  • Pumping distance: 100 feet + (30 m)

  • Pumping height: 60 feet (18 m)

  • Reversible pump direction

  • Hopper capacity: 60 gal / 8 cubic ft

  • Power requirements: 230V, 30A, 1-ph

  • Easy to take apart for quick clean-up and transport

  • Easy to maintain with long-wearing parts and components

hidden field
Toughtek P40 Bare, Graco Mortar Pump 25M050

$0.00

image

                          

CALL (630) 766-3498 FOR YOUR PERSONAL QUOTE TODAY!

Links for Graco ToughTek P40

Portable rotor stator pump for mortar and cementitious materialsBuilt for high-volume applications

High-Output mortar pump delivers mortars exactly where you need it

This versatile, powerful rotor stator pump allows you to bid more aggressively while still maintaining your bottom line. With 600 psi (41 bar) of pumping pressure, the ToughTek P40 Mortar Pump easily moves material 400 feet (122 m).

Going up? No problem. Use the P40 as a staging pump on the ground, and pump the mixed mortar up to where it’s needed – even if it’s 10 stories up. 

The rugged P40 can deliver 300 bags/hour

  • Pumping distance: 400 feet + (122 m) 

  • Pumping height: 150 feet (46 m)

  • Reversible pump direction

  • Hopper capacity: 16 gal / 2.2 cubic ft

  • Power requirements: 230V, 30A, 3-ph

  • Easy to take apart for quick clean-up and transport

  • Easy to maintain with long-wearing parts and components

hidden field
ToughTek MP20 Bare, Graco Mixing Pump 25M060

$0.00

image

                          

CALL (630) 766-3498 FOR YOUR PERSONAL QUOTE TODAY!

 SEVERAL VERSIONS AND PACKAGES  AVAILABLE.

Links for Graco ToughTek MP20

Rotor stator pump for mixing, pumping and applying pre-blended mortarsIdeal for self-leveling underlayment, non-shrink grout and pre-blended toppings

Self-leveling made easy

Mix, pump and apply pre-blended cementitious construction materials with a single, easy-to-use machine. With the ToughTek MP20 and MP40 Mixing Pump, water is automatically added to the mixing chamber. All you do is set the water flow rate, add material to the hopper and you’re ready to begin. Ideal for concrete repair or restoration and flooring applications.

Set water flow rate according to manufacturer’s directions
Break bags into hopper
Material and water are mixed within the mixing chamber
Once you set the water flow rate, you can run it all day long
Steady water input results in consistent material and flow - batch after batch, day after day
Two models: MP20 and MP40 (for high output applications)

Materials

Handles most pre-blended cementitious construction materials such as:

  • Self-leveling underlayments

  • Pre-blended topping materials

  • Pre-blended non-shrink grouts

Typical Applications

  • Correct uneven floors

  • Repair damaged concrete

  • Provide a smooth surface for carpet, tile or other floor covering

  • Structural grouting of steel columns

  • Anchoring applications

Designed with contractors in mind

  • Compact, easy to maneuver

  • Easy to operate with variable speed control

  • 425 psi (29 bar) pumping pressure

  • Vertical pumping distance: 60 feet (18 m)

  • Horizontal pumping distance: 200 feet (61 m)

  • Rugged hopper with bag breaker – holds six 50-lb (23 kg) bags

  • Power MP20: 230V, 30A, 1-ph

  • Power MP40: 230V, 30A, 3-ph

  • Output MP20: up to 25 lpm (50 cu ft/hr)

  • Output MP40: up to 50 lpm (100 cu ft/hr)

Fast Clean-Up and easy maintenance

  • Built-in cleanout sprayer and on-board water line makes it easy to clean out hopper

  • Drain port can be removed for thorough cleaning and rinsing

  • Mixing shaft can be quickly removed

hidden field

Hoyer Warner Inc.

840 Fairway Drive,

Bensenville, IL 60106

Phone. 630.766.3498

Fax. 630.860.1102

 For Sales: Contact Randy Griffith

rgriffith@hoyerwarner.com

For Parts: Contact Scott Schmied

sschmied@hoyerwarner.com